---
title: "Self-Leveling Compound Additives: HPMC, RDP, PCE"
url: https://landuchina.eu/self-leveling-compound-additives/
description: "Additives for cement and gypsum self-leveling compounds (EN 13813): Landercoll® K04 HPMC, Accurate® RDP, NOVASTAR® PCE 540P/570P and defoamer, with dosages."
author: "landuexpand@gmail.com"
date_published: 2026-05-20T03:10:02+00:00
date_modified: 2026-11-18T13:14:16+00:00
language: en-US
type: page
generator: LemonX AEO 1.4.12
---

# Self-Leveling Compound Additives: HPMC, RDP, PCE

Self-Leveling Compound Additives: Flow, Stability and Crack Resistance

Divider

Flow, bleed control and strength for cement- and gypsum-based floor levelers.

LANDU: Your Self-Leveling Compound Additives Manufacturer

Divider

A self-leveling compound has to flow like a liquid for 20–30 minutes, then behave like a strong, crack-free screed for 20 years. Those two demands pull in opposite directions, and the additive package is what reconciles them: a superplasticizer for flow at low water, a very low-viscosity cellulose ether to keep sand and water together, a polymer powder for flexibility and surface strength, and a defoamer to release the air that pumping puts in. Below are the Landercoll®, Accurate® and NOVASTAR® grades we recommend for each system, with starting dosages and a troubleshooting table.

What EN 13813 and the job site expect

Divider

| Property | How it is judged | Typical target | Controlling additive |
| --- | --- | --- | --- |
| Flow | Ring test (e.g. Ø 30 × 50 mm ring) | 130–150 mm spread, loss ≤ 10 mm after 20 min | PCE type and dosage, cellulose ether viscosity |
| Bleeding / segregation | Visual, after 10 min at rest | No water film, no sand settlement | Low-viscosity HPMC, defoamer compatibility |
| Surface | Visual after 24 h | No pinholes, craters or laitance | Powder defoamer, water content |
| Strength class | EN 13892-2 | CT-C25-F6 to CT-C35-F7 (cement); CA-C20-F4 to CA-C30-F6 (gypsum) | Water/binder ratio set by PCE; RDP for flexural strength |
| Walkability / overlay | Site schedule | Walkable 3–4 h, tiles after 24 h, resilient flooring 48–72 h | Binder system (OPC/CAC/CSA), accelerator, PCE profile |
| Dimensional stability | Shrinkage prism, visual | No curling, no cracking | RDP, water reduction, shrinkage control |
| Wear resistance | EN 13892-3/4 (A/AR classes) | Declared when used as wearing layer | RDP dosage, low w/b |

Grade selection by system

Divider

| System | Landercoll® cellulose ether | Accurate® RDP | NOVASTAR® PCE | NOVASTAR® defoamer | Other |
| --- | --- | --- | --- | --- | --- |
| Cement-based underlayment (OPC + CAC + anhydrite/gypsum) | K04 (300–500 mPa·s) 0.03–0.06 % | Rigid 5011N 1.5–3 % or semi-flexible 4025N 2–3 % | 540P or 550P, or TDS-series 590P, 0.15–0.35 % | P805, 0.1–0.3 % | Tartaric acid / Li₂CO₃ for set control |
| Cement-based wearing layer, high strength | K04 0.03–0.05 % | 4025N or 5045N, 3–4 % | 540P / 550P or 590P, 0.2–0.4 % | P805, 0.15–0.3 % | PP fibre 6 mm 0.05–0.1 % |
| Gypsum-based (α-hemihydrate or anhydrite) | K04 0.03–0.06 % | 4025N or 5045N, 1–2 % | 570P (gypsum system) or 590P, 0.1–0.3 % | P805, 0.1–0.2 % | Gypsum retarder P400 / AR-P, 0.02–0.05 % |
| Rapid-setting CAC-rich repair leveler | K04 0.02–0.04 % | 5011N, 1–2 % | 590FP (early strength), 0.15–0.3 % | P805 (P807 in cold weather), 0.1–0.2 % | Lithium carbonate accelerator |
| Pumpable large-area flooring | K04 0.03–0.06 % | 5011N or 4025N, 2–3 % | 550P, or 590P + 600P (slump retention), 0.2–0.4 % total | P805 (P806 alkali-resistant on request), 0.15–0.3 % | — |
| Waterproof / wet-room leveler | K04 0.03–0.05 % | 8048H (TDS lists cement-based self-leveling mortar), 2–3 % | 540P or 590P, 0.15–0.3 % | P805, 0.15–0.3 % | — |

Dosages are percentages of the total dry mix for laboratory starting points; the technical data sheets do not prescribe dosages. Cellulose ether in self-leveling compounds is dosed ten times lower than in tile adhesive; 0.01 % steps matter. The PCE technical data sheets give 0.1–0.5 % of cementitious material as the recommended range — the mortar-based figures above fall inside it once converted.

Why these grades:

- **K04** is the low-viscosity Landercoll® HPMC made for flooring: 300–500 mPa·s (Brookfield RV and NDJ-1, 2 %), final consistency "very low", and the TDS lists "increased leveling, surface aesthetics" and "improved flexural and tensile bond strength" among its properties. It suppresses bleeding and sand settlement without pulling flow down; a 0.02 % overdose costs 10–15 mm of spread, so viscosity, not dosage, is the main lever. See [HPMC viscosity for self-leveling mortar](https://landuchina.eu/hpmc-viscosity-self-leveling-mortar/).
- **Accurate® 5011N** (rigid, Tg 10 ± 5 °C) is the economical choice for underlayments that will be covered; **4025N** (semi-flexible, Tg 0 °C) and **5045N** (flexible, Tg −10 ± 5 °C) add flexural strength, abrasion resistance and surface quality to wearing layers; **8048H** is the instant-dissolving, very strongly hydrophobic grade whose TDS lists cement-based self-leveling mortar.
- **NOVASTAR® PCE 530P–580P series**: 540P (sulfoaluminate-cement water reducer, water-reduction rate 34 % on the product page) and 550P are the recommended grades for cement-based self-leveling; 570P (gypsum system, 37 %) is the recommended grade for gypsum-based self-leveling; 580P (37 %) is compatible with both.
- **NOVASTAR® PCE 590P** (TDS series) is the high-water-reduction powder polycarboxylate (water-reduction rate ≥ 25 %, 97 % solids, moisture ≤ 3 %, chloride ≤ 0.02 %, alkali ≤ 2.0 % Na₂O eq., heat-resistant to 50 °C). **600P** has the same specification with a long-lasting slump-retention profile for pumped and large-area work; **590FP** adds early-strength functional groups (compressive strength ratio > 240 % at 12 h and ≥ 200 % at 1 day in the TDS test, setting shortened by more than an hour) for rapid-set levelers. None of them may be combined with naphthalene sulfonate superplasticizers.
- **P805 / P806 / P807** are the NOVASTAR® powder defoamers: P805 is the standard grade, P806 the alkali-resistant version for high-pH, cement-rich binders, P807 the low-temperature version for winter production and cold-climate sites.

Troubleshooting: what the surface tells you

Divider

| Symptom | Likely cause | Adjustment |
| --- | --- | --- |
| Water film and sand at the bottom after 10 min | Cellulose ether too low or absent; too much water | Add 0.01–0.02 % K04; cut water 0.5 %; check PCE overdose |
| Spread falls from 145 to 120 mm in 15 min | Cement–PCE incompatibility, high temperature, C₃A-rich cement | Replace part of the 590P with 600P (slump retention); test with the second cement source |
| Pinholes and craters | Air from mixing/pumping not released; wrong defoamer type | Raise P805 to 0.2–0.3 % or move to P806 in cement-rich mixes; check K04 dosage |
| Random cracking after 1–3 days | High water, fast drying, no polymer | Lower w/b via PCE; 2–3 % RDP; protect from draughts for 24 h |
| Curling at edges | Differential drying, low polymer | 3 % 4025N or 5045N; reduce layer thickness variation; cure |
| Dusting, weak surface | Bleeding carried fines up; low RDP | Fix bleeding first (K04), then RDP ≥ 2 % |
| Too sticky, poor self-healing of trowel marks | Cellulose ether viscosity too high (a K40 or higher grade instead of K04) | Use K04 only |
| Slow strength gain in gypsum SLC | Over-retarded; PCE overdosed | Reduce retarder to 0.02 %; keep 590P ≤ 0.3 % and verify with the actual gypsum source |
| Walk-on time too long in a repair leveler | Binder too slow for the schedule | 590FP (early-strength PCE) with lithium carbonate; check CAC share |

Detailed case studies: [Preventing cracking in self-leveling compounds](https://landuchina.eu/prevent-cracking-in-self-leveling-compounds/) · [Cracks after curing](https://landuchina.eu/self-leveling-cracks-after-curing/) · [Bleeding and segregation](https://landuchina.eu/self-levelling-mortar-bleeding-segregation/).

Starting formulation (cement-based underlayment, dry mix)

Divider

| Component | Share |
| --- | --- |
| CEM I 52.5 R | 25 % |
| Calcium aluminate cement | 10 % |
| Anhydrite or α-gypsum | 5 % |
| Quartz sand 0.1–0.6 mm | 50 % |
| Limestone filler | 9 % |
| Landercoll® HPMC K04 | 0.04 % |
| Accurate® RDP 4025N | 2.5 % |
| NOVASTAR® PCE 590P | 0.25 % |
| NOVASTAR® defoamer P805 | 0.2 % |
| Tartaric acid / lithium carbonate | 0.05–0.15 % (set control) |
| Water | ≈ 20–22 % of dry mix |

Laboratory starting point only; the ternary binder ratio and set control must be tuned to local cement and the required walk-on time.

Products referenced on this page

Divider

- [Landercoll® HPMC for self-leveling compounds](https://landuchina.eu/applications/hpmc-for-self-leveling-compound/) — K04 specification and TDS
- [Landercoll® HPMC range](https://landuchina.eu/products-and-solutions/hydroxypropyl-methylcellulose-manufacturer/)
- [Accurate® RDP](https://landuchina.eu/products-and-solutions/china-rdp-powder-supplier-landu-accurate-high-performance-customizable-solutions/) — 5011N, 4025N, 5045N, 8048H
- [NOVASTAR® PCE range](https://landuchina.eu/products-and-solutions/polycarboxylate-superplasticizer-pce/) · [PCE 540P](https://landuchina.eu/pce-540p/) · [PCE 570P for gypsum](https://landuchina.eu/pce-570p/) · [PCE 590P](https://landuchina.eu/products-and-solutions/novastar-specialty-additives/polycarboxylate-superplasticizer-pce-high-performance-concrete-additive/novastar-pce-flake-590p/)
- [NOVASTAR® powder defoamer](https://landuchina.eu/products-and-solutions/powder-defoamer/) — P805 / P806 / P807
- [NOVASTAR® gypsum retarder](https://landuchina.eu/products-and-solutions/gypsum-retarder/) — P300, P400, AR-P

Why flooring producers work with LANDU

Divider

Self-leveling compounds expose weak additives faster than any other product: a batch of cellulose ether 20 % off viscosity shows up as bleeding on the next job. LANDU controls viscosity batch by batch in its own plants (three production bases, 75,000 t/year), supplies REACH-compliant grades under ISO 9001, and runs flow, bleeding and strength tests on customer formulations in its Jinan application laboratory. European customers are served through partners in several countries, including Greece, Spain and Italy, with 25 kg bags on pallets and 7–15 working-day factory lead times. Shelf life per TDS: K04 two years, RDP one year (use within six months of receipt recommended), PCE powder twelve months in the original packaging.

Self-Leveling Compound Additives: Frequently Asked Questions

Divider

Answers on additive selection, testing, samples and supplier qualification.

How to Change my Photo from Admin Dashboard?

Far far away, behind the word mountains, far from the countries Vokalia and Consonantia, there live the blind texts. Separated they live in Bookmarksgrove right at the coast

Request Samples and a Grade Recommendation

Divider

Send your current recipe and flow/strength targets.

We return a grade recommendation and dosage plan within two working days and ship samples of K04, 4025N, 590P and P805 free of charge.

REQUEST SAMPLES

**[Ask a Formulation Engineer](https://landuchina.eu/contact-us/)**

*LANDU — Committed to Every Gram.*
